Bestway 58665 - User Manual

Questions and Answers

J
Jessica SmithAug 8, 2025
Why is my Bestway Swimming Pool Cleaner not picking up debris?
- C
  christopherfloresAug 8, 2025
  Your Bestway Swimming Pool Cleaner might not be picking up debris due to several reasons. The debris compartment could be full, the pressure relief valve filter or pool suction fitting might be clogged, or the filter cartridge/sand could be too dirty. There may also be air inside the pump, or the wheels could be jammed. Ensure the water valve is open and that no other pool accessories are interfering with the flow rate. If the debris compartment or pressure relief valve filter is damaged, return to the shop for assistance. If the pool is not set up correctly with wrinkles, smooth the bottom of the pool.
M
Michael GibsonAug 15, 2025
What to do if Bestway Swimming Pool Cleaner hoses are entangled?
- G
  gonzalezjoseAug 15, 2025
  If the hoses of your Bestway Swimming Pool Cleaner are entangled, it could be due to a few reasons. The hose might not be straightened out, or it might be sinking into the water, or the robot running speed could be too fast. To fix this, turn off the pump and reconnect the product at the diagonal position of the pool, ensuring the water hose is in a C shape and placed into the water in the direction of the water hose. Adjust the position of the float to make the hose float on the water. Regulate the pressure relief valve.
X
xbrooksAug 29, 2025
What to do if my Bestway Swimming Pool Vacuum doesn't cover the entire pool?
- A
  Alexander SteeleAug 29, 2025
  If your Bestway Swimming Pool Vacuum isn't covering the entire pool, it might be due to the wheels not being in the correct position. Try adjusting the wheel driving angle to correct the robot's path.
X
xfrankNov 21, 2025
Why is my Bestway Swimming Pool Vacuum not picking up debris or moving?
- L
  lucasbakerNov 22, 2025
  If your Bestway Swimming Pool Vacuum isn't picking up debris, moving slowly, or not moving at all, several factors could be at play. First, check if the debris compartment is full and clean it out. Also, the pressure relief valve filter might be clogged; rinse it with water to clear any blockages. Ensure the pool suction fitting isn't clogged either. If the filter cartridge or sand is too dirty, clean or replace the filter cartridge, or backwash and rinse the sand if you have a sand filter pump. Air inside the pump can also cause issues; stop the filter pump, purge the air, and restart. If the robot is stuck on wrinkles, drain the pool, smooth the bottom, and refill it. Remove any additional accessories like chlorinators or pool heaters, as they can reduce flow rate. Ensure your filtration...