Need help?Do you have a question about the Bestway Flowclear 58486 and is the answer not in the manual?
General| Brand | Bestway |
|---|---|
| Model | Flowclear 58486 |
| Voltage | 220-240V |
| AC input voltage | 220-240V |
| Frequency | 50Hz |
| System's water flow rate | 2000 gallons per hour |
| Suitable for pool volume | 1100 - 31700 l |
| Power supply type | Electric |
| Package width | 58.5 cm |
| Package depth | 57.5 cm |
| Package height | 460 mm |
| Hose Diameter | 3.8 cm |
Critical safety guidelines for operating the sand filter.
Essential precautions for installation and use of electrical equipment.
Warnings about electrical hazards and pool usage.
Guidelines on managing and replacing the power cord and plug.
Guidance on storing the unit and keeping instructions for future reference.
Guidelines for children's use and supervision.
Instructions on positioning the sand filter for proper operation and access.
Advice on checking parts and replacing deteriorated components.
Recommendations on filtration time when using chemicals.
Recommendations for backwashing and daily filtration operating hours.
Importance of replacing damaged parts and regular inspection of filter media.
Instructions on proper disposal of electrical appliances.
Technical details including diameter, area, pressure, and temperature.
Specifies sand size and capacity for the filter.
Lists and identifies all parts of the sand filter with reference numbers.
Instructions for unpacking, checking components, and placing the filter.
Requirements for vertically fixing the sand filter to a pedestal.
Guidance on using specific pool-grade filter sand and its quantity.
Steps for connecting the sand filter to the pool.
Specific connections for pools with 32 mm valves.
Reminder to read the manual carefully before switching on.
Step-by-step guide to test the RCD plug for safety.
Critical warnings regarding RCD plug testing and usage.
How to use the timer to set the sand filter's operating cycles.
Table detailing knob positions for working, rest, and cycle times.
Caution against changing valve positions while the pump is running.
Instructions on how to select desired functions by rotating the valve handle.
Normal filtering operation and stopping water flow.
Cleaning the sand bed and initial setup procedures.
Draining water from the pool and bypassing the filter.
Compliance with local codes for wastewater disposal.
Precautions for valve positions and releasing air from the system.
Procedure for preparing the pump for first use and washing the sand.
Caution against operating the sand filter without water.
Starting filtering and monitoring operational pressure.
Ensure the sand filter is off and unplugged before maintenance.
When to clean the sand bed based on pressure gauge readings.
Step-by-step guide to remove, clean, and replace the strainer.
Instructions for draining pool water using the sand filter.
Steps to protect equipment from freezing and store the filter.
Causes and solutions for sand in pool water and lack of water flow.
Causes and solutions for high pressure and leaks from valve/connectors.
To Next Page