LaserSpeed 9000 Operator Guide
LaserTrak Software
Part No. 93296 / Drawing No. 0921-01419 Page 15 of 16 Revision F (Feb 2013)
The Chart Recorder Screen acquires Speed, Length, Quality Factor and
Status from the gauge and displays them on a chart recorder screen.
Chart Recorder Screen
The Quality Factor represents how well the gauge is measuring the product.
Quality Factor ranges from 0 to 15, with 15 being the best. Always try to get
Quality Factor to equal 15. If Quality Factor is not 15, check the standoff
distance, the alignment, make sure the product does not have any water on
the surface. See the LS9000 Instruction Handbook for more details.
To Next Page
Loading...
Need help?
General
