Beta 1760 PA/AC User Manual

EN
2
AMPEROMETRIC CLAMP
MOD. 1760 PA/AC
SAFETY NOTES
Do not exceed the maximum allowable input range of any function
Do not apply voltage to meter when resistance function is selected.
Set the function switch OFF when the meter is not in use.
WARNINGS
Set function switch to the appropriate position before measuring.
When measuring volts do not switch to current/resistance modes.
Do not measure current on a circuit whose voltage exceeds 240V.
•
•
•
•
•
•
This symbol, adjacent to another symbol or terminal, indicates the user must refer to this
manual for further information.
This symbol, adjacent to a terminal indicates that under normal use hazardous voltages
may be present
Double insulation

Beta 1760 PA/AC Specifications

General

Brand	Beta
Model	1760 PA/AC
Category	Measuring Instruments
Language	English