49
GB
2
OPERATION AND USE
RECOMMENDED LUBRICANTS AND LIQUIDS
For better operation and longer vehicle life, we advise you to use the products listed
in the following chart:
TYPE OF PRODUCT TECHNICAL SPECIFICATION
MOTOR OIL
OIL FOR MIXTURE
BRAKE AND CLUTCH OIL
BARDAHL VBA KXT
BARDAHL BRAKE FLUID DOT 4
BARDAHL OUTBOARD GREASE
BARDAHL PERMANENT
IDEMITSU OJ-RACING-01
or
BEL RAY "MC 10 SAE 5"
FORK OIL
GREASE FOR JOINTS AND RODS
LIQUID COOLANT
BARDAHL GEARBOX 10W30
BREAKING IN
Breaking in takes approximately 10 hours of operation.
During this time we suggest to:
• Ride after having well warmed the engine
• Avoid travel at constant speed
• Change speed often so that the parts wiII break in uniformly and in a shorter time
• Avoid turning the throttle more than 3/4 of the way.
Warning:
• After the first 5 hours of operation, change the gear box oil.
• Always use a mixture of unleaded super fuel and oil (mineral oiI 4%,
synthetic oil 1,5 %).
• After the first off-road use, check all the nuts and bolts.
NOTE:
For substitution, follow attentively the chart.
To Next Page
Loading...
Need help?
General
