7
STANDARD ADJUSTMENTS - FORK
MARZOCCHI
Compression adjust range 18 clicks
Rebound adjust range 10 clicks
Oil type EB-H16 SAE 7,5
STANDARD ADJUSTMENTS - SHOCK ABSORBER
SACHS
Compression adjust range
clicks 21/21 (low speed)
clicks 24/24 (high speed)
Rebound adjust range 24
Spring preload 260 mm
3 - Tighening torques, specifications, recommended products Release 00 Date 02/2005
SPECIFICATIONS - CYCLE PARTS
250/400/450/525
Frame Single-beam, molybdenum steel frame with double cradle split over exhaust port
Fork “MARZOCCHI” hydraulic upside-down fork (leg Ø 45)
Front/rear suspension travel 290/300 mm
Rear suspension SACHS monoshocks with progressive leverage
Front brake Floating steel disc Ø 255 mm with floating caliper
Rear brake Steel disc Ø 240 mm with floating caliper
Brake discs Wear limit 0.4 mm
Front tyre 90/90 - 21”
Tyre pressure, off road 1,0 bar
Tyre pressure, road use 1,5 bar
Rear tyre 140/80 - 18”
Tyre pressure, off road 1,0 bar
Tyre pressure, road use 1,8 bar
Fuel tank capacity 8,5 litres (including 1 litre reserve)
Chain 135 ZRDK / 007
Bulbs Headlight 12V 25/25W
Parking light 12V 3W
Brake/Rear light 12V 21/5W
Indicators 12V 10W
Number plate light 12V 5W
Battery 12V 5Ah
Caster angle 26,5°
DIMENSIONS - RR 250
Maximum length 2270 mm
Maximum width 813 mm
Maximum height above ground 1255 mm
Wheelbase 1490 mm
Saddle height 940 mm
Ground clearance 320 mm
Footrest height 405 mm
DIMENSIONS - RR 400 - 450 - 525
Maximum length 2270 mm
Maximum width 813 mm
Maximum height above ground 1255 mm
Wheelbase 1500 mm
Saddle height 940 mm
Ground clearance 320 mm
Footrest height 405 mm
To Next Page
