What to do if my Better BT6000 will not switch on?
If your Better Car Video System won't turn on, there are a few potential reasons. First, make sure your car ignition is on by turning the key. Second, check the cable connections to ensure they are properly connected. Lastly, inspect the fuse; if it's burnt, replace it with a new fuse of the same capacity.
What to do if Better BT6000 has no sound?
If you're experiencing no sound with your Better Car Video System, the volume might be set to the minimum, or the mute function could be activated. Check the volume level and switch the mute function off.
Why does my Better BT6000 Car Video System skip sound due to vibration?
Sound skipping in your Better Car Video System due to vibration can occur if the mounting angle is over 30 degrees. Adjust the mounting angle to less than 30 degrees. Also, ensure the unit is securely mounted with the provided parts, as unstable mounting can also cause this issue.
What to do if my Better BT6000 remote control is not working?
If the remote control for your Better Car Video System isn't working, the battery may be low or empty. Try changing the batteries.
What to do if my Better BT6000 doesn't function normally?
If your Better Car Video System unit or screen isn't functioning normally, the system might be unstable. Press the RESET button to resolve this.
Why is my Better BT6000 unable to receive stations?
If your Better Car Video System is unable to receive stations, it might be due to the antenna not being connected properly. Ensure that the antenna is correctly connected.
Why is my Better BT6000 Car Video System appliance not playing discs?
If your Better Car Video System isn't playing discs, the disc might be inserted incorrectly; ensure the label side is facing up. Alternatively, the disc could be dirty or damaged. Clean the disc and check for any damage, or try using a different disc.
Why is the reception of radio stations poor on my Better BT6000 Car Video System?
Poor radio station reception on your Better Car Video System could be because the antenna is not fully extended or is broken. Fully extend the antenna; if it's broken, replace it with a new one.
Why does my Better BT6000 Car Video System lose preset stations?
If your Better Car Video System loses preset stations, the battery cable might not be properly connected. Connect the permanent live on the unit to the permanent live on the vehicle.
What to do if I am unable to insert a USB device into my Better BT6000?
If you're unable to insert a USB device into your Better Car Video System, the USB device may have been inserted the wrong way round. Try inserting the USB the other way around.
Safety information for handling the CLASS 1 LASER PRODUCT.
Detailed explanation of each button and slot on the control panel.
Explanation of all buttons and their functions on the remote control.
How to play discs and navigate the DVD playback menu.
Steps to enable and pair a Bluetooth-enabled mobile phone with the unit.
How to dial, answer, and reject calls via Bluetooth.
How to stream audio wirelessly from a mobile phone.
Introduction to SmartLink and instructions for connecting Android phones.
How to connect and mirror an iPhone screen to the unit.
How to adjust equalizer settings, fader, balance, and subwoofer levels.
Important notes and precautions for connecting the unit.
Wiring diagrams for parking brake and backup camera connections.
A comprehensive wiring diagram for all unit connections.
Solutions for common problems like unit not switching on or remote issues.
Troubleshooting steps for disc playback, radio reception, and USB device errors.
General| Brand | Better |
|---|---|
| Model | BT6000 |
| Category | Car Video System |
| Language | English |
To Next Page