20
9. FCC Statement
NOTE: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in
a residential installation.
The equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the
receiver.
•
Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
10. Technical Specifications
Model-No. BM 44
Method of
Measurement
oscillometric, non-invasive blood pres-
sure measurement on the upper arm
Measurement
Range
pressure 0 –
295 mmHg,
pulse 40 –180 beats/minute
Accuracy of the
pressure reading
systolic ± 3 mmHg/diastolic ± 3 mmHg/
pulse ± 5 % of the displayed value
Measuring uncer-
tainty
max. permissible standard deviation
according to clinical testing:
systolic: 8 mmHg / diastolic: 8 mmHg
Unit Dimension
3.7“ x 4.8“ x 2.1“ (94 x 122 x 53 mm)
Unit Weight approx. 0.5 lb (230 g), excluding bat-
teries
Cuff Size
Standard size: for upper arm circumfer-
ence of 8.7” to 11.8” (22 cm to 30 cm)
Large size: for upper arm circumfer-
ence of 11.8” to 16.5” (30 cm to 42 cm)
Operating Tem-
perature and
humidity
41 °F to 104 °F (+ 5 °C to + 40 °C),
< 80 % relative humidity
Storage Tempera-
ture and humidity
- 4 °F to 131 °F(- 20 °C to + 55 °C),
< 95 % relative humidity
To Next Page
