To Next PageTo Next PageWhat to do if my Beurer FT 55 is not working?
If your Beurer Thermometer is not functioning correctly, remove the battery for about 1 minute, then reinsert it. If the problem continues, it may be necessary to consult your dealer or customer service.
How to fix Beurer FT 55 Thermometer autotest failure?
If the autotest on your Beurer Thermometer is not successful, try inserting a new battery.
What to do if Beurer Thermometer reads too high?
If your Beurer Thermometer displays a temperature higher than 42.2 °C (108 °F) in Ear thermometer mode or higher than 80 °C (176 °F) in SCAN mode, ensure you are operating the thermometer within its specified temperature ranges. Clean the sensor tip if needed. If the error persists, contact your dealer or customer service.
Why does my Beurer FT 55 show a low temperature?
If your Beurer Thermometer shows a temperature lower than 34 °C (93.2 °F) in Ear thermometer mode, or lower than -22 °C (-7.6 °F) in SCAN mode, make sure you are using the thermometer within the correct temperature ranges. If necessary, clean the sensor tip. If the problem continues, contact your dealer or customer service.
Why Beurer Thermometer shows incorrect temperature?
If there's a large fluctuation in ambient temperature, store the Beurer Thermometer for at least 30 minutes in the room where you plan to take the measurement.
General| Brand | Beurer |
|---|---|
| Model | FT 55 |
| Category | Thermometer |
| Language | English |
Details the components and controls visible on the front of the thermometer.
Details the components and features visible on the rear of the thermometer.
Step-by-step instructions for setting the device's internal clock and date.
Comprehensive guide on how to correctly perform temperature measurements in the ear.
Explains the process of automatically storing and accessing recorded temperature readings.
Instructions for measuring the temperature of objects or liquids using the SCAN mode.
Guide on how to measure and display the surrounding room temperature.
How to switch between Celsius (°C) and Fahrenheit (°F) measurement units.
