To Next PageTo Next PageWhat to do if Beurer Thermometer is not working properly?
If your Beurer Thermometer isn't functioning correctly, first, try replacing the batteries. If the issue continues after replacing the batteries, it may be necessary to contact customer service for further assistance.
What to do if there is a large fluctuation in ambient temperature when using Beurer Thermometer?
If you're experiencing issues with your Beurer Thermometer due to ambient temperature fluctuations, place the device in the room where you intend to take the measurement for at least 30 minutes. Ensure the room's ambient temperature is between 10 °C and 40 °C (50 °F and 104 °F).
What to do if Beurer FT 58 Thermometer reads too high temperature?
If your Beurer Thermometer displays a temperature exceeding 109.4 °F (43 °C) during in-ear measurement or 212 °F (100 °C) during object measurement, ensure you are using the thermometer within its specified measurement range. Also, verify that both the device and protective cap are in good working order before attempting the measurement again.
What to do if Beurer Thermometer reads too low temperature?
If the Beurer Thermometer shows a temperature below 82.4 °F (28 °C) for ear measurements or below -4 °F (-20 °C) for object measurements, make sure you are using the thermometer within its specified measurement range. Check that the device and the protective cap are fully functional, and then repeat the measurement.
What to do if Beurer FT 58 shows 'Autotest in progress'?
If your Beurer Thermometer displays 'Autotest in progress, device not ready', retry the measurement. Ensure that you only take measurements when either the body temperature mode or the object temperature mode appears on the display.
General| Type | Contact |
|---|---|
| Display | LCD |
| Product color | White |
| Memory capacity | 10 entries |
| Memory function | Yes |
| Thermometer location | Ear |
| Units of measurement | °C, °F |
| Battery voltage | 1.5 V |
| Number of batteries supported | 2 |
Explanation of safety signs and symbols used in the manual for hazard identification and warnings.
Guidelines for safe use, storage, and disposal of batteries to prevent damage or injury.
Procedure for configuring the device's internal clock and date settings.
Instructions on how to switch between Fahrenheit and Celsius temperature units.
Step-by-step guide for accurately measuring body temperature using the ear canal.
Explanation of how the device indicates different temperature levels, including fever.
Instructions for measuring the temperature of objects or surfaces.
How the device displays and measures the surrounding air temperature.
Guide on how to access and view previously recorded temperature readings.
