EasyManua.ls Logo

Beurer LS 50 - User Manual

Beurer LS 50
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LS 50
ENGLISH
Luggage Scale
Instructions for use ................................................................................2
ESPANOL
Báscula para equipaje
Instrucciones de uso
................................................................................... 8
FRANÇAIS
Pèse-bagage
Mode d’emploi ......................................................................................14
Distributed by/Distribuido por/Distribué par :
Beurer North America LP
900 N Federal Highway, Suite 300
Hallandale Beach, FL 33009
www.beurer.com
READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE USING THIS PRODUCT
Keep this manual in a safe location for future reference
LEA TODO ESTE MANUAL CON ATENCIÓN ANTES DE USAR ESTE PRODUCTO
Conserve este manual en un lugar seguro para consultarlo en el futuro
LISEZ CE MODE D’EMPLOI COMPLÈTEMENT ET ATTENTIVEMENT AVANT
D’UTILISER CE PRODUIT
Conservez ce manuel en lieu sûr pour y faire référence ultérieurement
Questions or comments?
Call toll free 1-800-536-0366 or contact info@beurer.com
¿Preguntas o comentarios? Llame gratis al
1-800-536-0366 o póngase en contacto info@beurer.com
Questions ou commentaires? Appeler gratuitement
1-800-536-0366 ou communiquez avec info@beurer.com

Table of Contents

Questions and Answers

  • A
    Andrew MillsAug 10, 2025
    Why does my Beurer LS 50 display 'LO' and the battery symbol is flashing?
    • A
      Alexis GoodAug 10, 2025
      The 'LO' message and flashing battery symbol on your Beurer Scales indicate that the battery level is too low. To resolve this, recharge the battery.
  • L
    lhardyAug 20, 2025
    How to fix Beurer Scales after charging when the LCD Display illuminates and I cannot weigh any luggage?
    • L
      lauren01Aug 20, 2025
      If, after charging, the LCD Display illuminates and you cannot weigh any luggage, wait five seconds until the display switches off, and then press the 'unit/tare' button. '0.00' should appear on the LCD Display, and you can now weigh luggage again.
  • A
    Austin BellAug 29, 2025
    How to resolve 'uNsT' error on Beurer LS 50 Scales display?
    • M
      Michael FrostAug 29, 2025
      If 'uNsT' is shown on the display of your Beurer Scales, turn the scale off, then turn it back on. Wait until '0.00' appears on the LCD display.

Beurer LS 50 Specifications

General IconGeneral
BrandBeurer
ModelLS 50
CategoryScales
LanguageEnglish

Related product manuals