Beurer MG79 - Device Description; Massager Components Overview; Attachment Details; Usage

19
Direct current
The device is suitable for use
with direct current only
Importer symbol
5. DEVICE DESCRIPTION
5.1 Deep Tissue Massager
The associated drawings are shown on
page 3.
1
Attachment
3 dierent attachments are available
2
Attachment connection
3
Handle
4
Intensity indicator (3 LEDs)
3 LEDs, starting from left to right
5
ON/OFF button
6
USB-C cable connection
7
Battery level indicator (1 LED)
During operation:
LED lights up white = battery level
25–100%
LED flashes red = battery level 0–25%
During charging:
LED flashes white = battery charging
LED lights up white =
battery fully charged
8
USB-C cable
9
Storage bag
5.2 Attachments
10
Flat head
Best suited for treating large areas
on the entire body (e.g. the thigh).
11
Spiral head
Best suited for treating deep muscle
tissue and for targeted spot mas
-
sages (e.g. on the sole of the foot).
12
Air cushion head
Best suited for sensitive parts of the
body (e.g. the neck).
6. USAGE
6.1 Initial use/
charging the battery
The massage must feel pleasant
at all times. Start the treatment at
the lowest intensity level and then
increase it according to your pref
-
erences if necessary. A slight hae-
matoma may well occur – this is a
positive therapeutic eect as the
use of the device can selectively
encourage your blood flow. In iso
-
lated cases, areas of redness may
also occur on the skin. If you ex
-
perience excessive skin irritation,
stop using the device and consult
a doctor. Depending on the level
of tension, a treatment time of ap
-
prox. 10 minutes is recommended
for the desired area (neck, shoul
-
ders, back, arms, buttocks or legs).
Before using the Deep Tissue Massager for
the first time, charge it for a minimum of
1:30 hours. To do so, proceed as follows:
1. Remove all packaging material from the
device.