Beyerdynamic LAGOON ANC - Troubleshooting and Maintenance; Common Issue Resolution; Volume, Sound, and Range Issues; Using Audio Cable, Maintenance, and Battery

Lagoon ANC – Bluetooth® Headphones
16
Troubleshooting
P
roblem
C
ause
S
olution
T
he headphones cannot be
switched on
B
attery is empty or almo
empty
C
harge the battery
No audio output No Bluetooth® connection Pair the headphones with the
p
layer
T
he headphones do not
a
ppear among the
available Bluetooth® devices on
the player
•
The headphones are switched
o

• The headphones are not in
pairing mode
• A Bluetooth® connection to
another player exis already
•
Turn on the headphones
• Put the headphones into
pairing mode
• Disconnect the Bluetooth®
connection to the other player
and connect the headphones
to the desired device
Playback volume is too low, even
though the headphone volume
is set to maximum
The received audio signal is too
low
Increase the playback volume
on the player to maximum
The sound is harsh and the bass
response is too low
Insuicient seal of the ear pads Adju the headphones over
your ears so that maximum seal
is achieved
The wireless range is too low or
the connection is disrupted
There are inteerences with
other devices
Move away from WLAN routers
and microwave ovens, ensure
that your body is not between
the player and the headphones
Using the audio cable
The supplied audio cable has a mini jack plug (3.5 mm) on either end. With the audio cable you can use
the headphones without a Bluetooth® connection or when the battery is empty.
1. Switch o the headphones so that no electricity is drawn from the battery.
2. Connect one end of the audio cable to the jack socket  of the right earcup.
3. Connect the other end of the audio cable to the player.
Maintenance
• To clean the Lagoon ANC use only a so cloth - either dry or slightly damp.
• Do not use cleaners that contain solvents as they can damage the suace.
Notes on battery life for Li-ion batteries
• Aer fully charging, disconnect the charging cable from the charger and the headphones.
• High temperatures, especially when fully charged can lead to irreversible damage.
• If the battery is not used for extended periods of time, it is recommended to charge it to
approx. 50 % and ore it at temperatures not exceeding 20 °C.
• Switch o the battery-powered product aer use.
Spare pas
• Spare pas for the headphone can be found on the web at:
www.beyerdynamic.com/service.