To Next Page
S
Sarah MartinezAug 17, 2025
Why is there no audio output from my Beyerdynamic Headphone?
- RRobert BrooksAug 17, 2025
The most likely reason is that there is no Bluetooth connection. To fix this, pair your Beyerdynamic headphones with the player.
Why is there no audio output from my Beyerdynamic Headphone?
The most likely reason is that there is no Bluetooth connection. To fix this, pair your Beyerdynamic headphones with the player.
What to do if my Beyerdynamic Headphone playback volume is too low?
If the playback volume on your Beyerdynamic Headphone is too low, even at maximum headphone volume, the received audio signal might be too low. Increase the playback volume on the player to the maximum.
What to do if playback volume is too low on Beyerdynamic Headphone?
If the playback volume is too low on your Beyerdynamic Headphone, even when the headphone volume is at maximum, the received audio signal might be too low. Increase the playback volume on the player to maximum to resolve this.
How to fix harsh sound and low bass on Beyerdynamic LAGOON ANC?
If the sound from your Beyerdynamic Headphone is harsh and the bass response is too low, the ear pads may not be sealed properly. Adjust the headphones over your ears to achieve maximum seal.
Why my Beyerdynamic LAGOON ANC Headphone has low wireless range or disrupted connection?
Interference from other devices might be the cause of low wireless range or disrupted connection on your Beyerdynamic Headphone. Move away from WLAN routers and microwave ovens, and make sure that your body isn't between the player and the headphones.
What to do if my Beyerdynamic LAGOON ANC cannot be switched on?
If your Beyerdynamic Headphone cannot be switched on, the battery is likely empty or almost empty. Charge the battery.
Why Beyerdynamic Headphone doesn't appear on available Bluetooth devices?
Your Beyerdynamic Headphone might not appear on the player if: - The headphones are switched off. - The headphones are not in pairing mode. - A Bluetooth connection to another player already exists. To resolve this: - Turn on the headphones. - Put the headphones into pairing mode. - Disconnect the Bluetooth connection to the other player and connect the headphones to the desired device.
Why is the wireless range too low on my Beyerdynamic LAGOON ANC Headphone, or why is the connection disrupted?
If the wireless range of your Beyerdynamic Headphone is too low or the connection is disrupted, it might be due to interferences with other devices. To resolve this, move away from WLAN routers and microwave ovens, and ensure that your body is not between the player and the headphones.
What to do if there is no audio output from my Beyerdynamic LAGOON ANC?
If you're experiencing no audio output from your Beyerdynamic Headphone, it could be due to a lack of Bluetooth® connection. To fix this, pair the headphones with the player.
Why won't my Beyerdynamic LAGOON ANC appear on my device's available Bluetooth devices?
Your Beyerdynamic Headphone might not appear among the available Bluetooth® devices on the player for a few reasons: * The headphones are switched off. * The headphones are not in pairing mode. * A Bluetooth® connection to another player already exists. To resolve this: * Turn on the headphones. * Put the headphones into pairing mode. * Disconnect the Bluetooth® connection to the other player and connect the headphones to the desired device.
General| Driver Type | Dynamic |
|---|---|
| Frequency Response | 10 Hz - 30 kHz |
| Bluetooth Version | 4.2 |
| Noise Cancellation | Active Noise Cancellation (ANC) |
| Microphone | Yes |
| Driver Size | 40 mm |
| Sound Pressure Level (SPL) | 91 dB |
| Wireless Range | Up to 10 m |
| Connector | 3.5 mm |
| Battery Life | Up to 24.5 hours with ANC |
| Weight | 283 grams |
| THD | < 0.3% |
| Bluetooth Codecs | AAC, SBC |
| Charging Time | 3 hours |
| Type | Over-Ear |
| Cable Length | 1.2 m |
