12/20
Connecting to a device via Bluetooth
®
(pairing)
Before you can use the product, you mu pair it with your mobile phone or another
Bluetooth
®
-enabled device. The pairing procedure may di er depending on the device.
► Please refer to the relevant operating in ructions of the device you wish to pair the product with.
E ablishing a connection:
The product is switched on.
1. Press and hold the button for 1 to 3 s.
The Bluetooth
®
connection mode will sta .
The LED display flashes alternately blue and red.
2. Activate the Bluetooth
®
function on the playback device and search for new devices if
necessary.
3. In the Bluetooth
®
menu of the playback device, select “SPACE” from the available
devices and connect both devices.
A er a successful connection, the LED is a steady blue. Each time the unit is switched on
again, the units will connect as soon as they are within range of each other.
Deleting the li of already connected devices:
► Press the
button for longer than 10s.
The list of already connected Bluetooth® devices (maximum 8) is deleted and a
connection to the active Bluetooth® device is established.
A double signal tone confirms success.
Connection displays
LED display of the connection atus:
Bluetooth
®
:
Pairing/recognition possible
Flashes blue
and red
alternately
Bluetooth
®
:
Connected
Steady blue
Bluetooth
®
:
Connectable / connection lo
Flashes blue
Connected to USB Entire LED ring
is white
To Next Page
Loading...
