Beyerdynamic UHF Wireless System Opus 900

To Next Page

To Previous Page

1.4.5 Squelch

• Turn the menu control to select “SQ”. The currently selected squelch is displayed.

• To change the squelch level, press the menu control. The squelch level will start to flash. Turn the

menu control to select the desired squelch level between 1 and 99. In order to confirm the

selected squelch level, press the menu control.

1.4.6 Output Level / Mute

• Turn the menu control to select “VOL”. Now you can check the output level or if the receiver is

muted.

• To change the setting, press the menu control. The current setting will start to flash.

• Turn the menu control to mute the receiver or to set the output level according to the transmitter

gain (0 dB, -10 dB, -20 dB, -30 dB).

• Press the menu control to confirm the setting.

Beyerdynamic UHF Wireless System Opus 900 - Page 52