Need help?Do you have a question about the Beyerdynamic TG 1000 and is the answer not in the manual?
General| Frequency Range | 470 - 865 MHz |
|---|---|
| Modulation | Digital |
| Operating Range | Up to 100 m (line of sight) |
| THD | < 0.1 % |
| Type | Wireless |
| Audio Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | > 110 dB |
| Power Supply | Rechargeable battery |
| Battery Life | Up to 8 hours (with handheld transmitter) |
Key safety instructions for system setup and operation, including warnings and general guidelines.
Advice on positioning the receiver for optimal performance and accessibility, avoiding hazards.
Precautions against fire risks and damage from humidity or heat sources.
Guidelines for safely connecting the receiver to the power supply.
Safety measures for handheld and beltpack transmitters, including battery contacts.
Guidelines for using, handling, and disposing of batteries and rechargeable batteries.
Identification and description of front and rear panel controls, buttons, and indicators.
Instructions on how to lock and unlock the receiver's front panel buttons.
Guide for connecting antennae to the receiver and positioning remote antennae.
Steps for mounting the receiver, connecting to audio inputs, and power supply.
Initial setup, operation, and understanding the receiver's standard display.
Explanation of icons displayed on the receiver for status and functions.
Overview of adjustable settings via the receiver menu and navigation controls.
How to view and interpret audio and RF levels on the receiver display.
Procedure for assigning a custom name to the receiver.
Viewing audio signal levels for channels on the receiver display.
Procedure for entering an artist's name into the receiver.
How to select frequency groups and channels based on region codes.
Procedure for manually selecting the operating frequency.
Using the quick scan feature to find available frequencies.
Adjusting the audio output level for the handheld transmitter.
Adjusting the audio output level for the beltpack transmitter.
Setting the transmitter's RF power output level.
Selecting battery type for accurate status display on receiver.
Activating/deactivating audio data encryption for secure listening.
Enabling/disabling the power lock function on the transmitter.
Enabling/disabling the mute function via the transmitter's on-off switch.
Adjusting receiver settings and updating transmitter firmware.
Steps to connect the receiver to a network for configuration and updates.
Displaying and setting the receiver's IP address.
Displaying and setting the receiver's network mask.
Selecting network mode for automatic or manual IP assignment.
Assigning a unique device ID to the receiver for network identification.
Viewing the receiver's unique MAC address.
Using the web interface for configuring and monitoring TG 1000 receivers.
Performing frequency scans to find optimal channels and detect interference.
Displaying RF signals and analyzing interference using the software.
Clearing logs and adjusting display positions within the software.
Using the walking test to diagnose signal reception issues.
Changing receiver settings and applying them directly.
Accessing detailed device info and loading user groups.
Information on single-client access and error messages.
Adjusting the receiver display's brightness level.
Steps to reset the receiver to its default factory settings.
Viewing current firmware versions and region codes.
Procedure for updating the receiver's firmware via the network.
Procedure for updating the transmitter's firmware using infrared.
Listening to audio channels using the receiver's headphone output.
Important warning about potential hearing damage from high volume.
Transmitting frequency and settings from receiver to transmitter.
Steps to synchronize multiple transmitters to the same receiver channel.
Cascading multiple receivers for expanded channel capacity.
Identification of controls and indicators on the front and rear panels.
Overview of the WA-AS 6 antenna splitter's features and capabilities.
Instructions for installing the antenna splitter into a rack and connecting components.
Identification of controls and indicators on the handheld transmitter.
Procedure for attaching and changing microphone heads on the transmitter.
Details on available microphone capsules (TG V50w, V56w, V70w).
Details on available microphone capsules (TG V90w, V96w).
Instructions for inserting batteries into the handheld transmitter.
Guide to turning on, operating, and turning off the handheld transmitter.
Procedure for synchronizing the handheld transmitter with the receiver.
Procedures for cleaning and maintaining the handheld transmitter.
Identification of controls and indicators on the beltpack transmitter.
Instructions for inserting batteries into the beltpack transmitter.
Guide to turning on, operating, and turning off the beltpack transmitter.
Procedure for synchronizing the beltpack transmitter with the receiver.
How to use the gain switch on the beltpack transmitter.
Instructions for attaching and mounting the belt clip.
General guidelines for transmitter battery checks, replacement, and cleaning.
How transmitter and receiver settings affect audio levels.
Explanation of how system components contribute to overall audio amplification.
Block diagram illustrating audio signal path in beltpack transmitters.
Block diagram illustrating audio signal path in handheld transmitters.
Block diagram illustrating audio signal path in receivers.
List of available Digital UHF Diversity Receiver models by region.
List of available Digital UHF Handheld Transmitter models by region.
List of available Digital UHF Beltpack Transmitter models by region.
List of accessories included with the diversity receiver.
List of optional accessories available for the TG 1000 system.
Detailed technical specifications for the Digital UHF Diversity Receiver.
Detailed technical specifications for the Digital UHF Handheld Transmitter.
Detailed technical specifications for the Digital UHF Beltpack Transmitter.
Technical specifications for the WA-AS6 6-way Wideband Antenna Splitter.
Technical specifications for the WA-AMP Wideband Antenna Amplifier.
Details of the Council directives applied to the equipment.
List of standards the equipment conforms to for compliance.
Information regarding the manufacturer's name, address, and equipment type.
FCC identification codes for the TG 1000 Beltpack and Handheld transmitters.
Industry Canada identification codes for the TG 1000 system.
Important notes on FCC compliance, interference, and usage restrictions.
Information for users regarding licensing, operation, and FCC rule changes.
To Next Page
