TG 1000 – Digital Handheld Transmitter
29
3.2 How to Attach the Microphone Head
For the TG 1000 handheld transmitter there are different condenser
and dynamic microphone capsules or the WA-HHA-SHBY adapter
available to connect microphone heads with a 1.25"/28 thread from
other manufacturers. Refer also to “Optional Accessories”.
• Put the requested microphone head or the WA-HHA-SHBY
adapter onto the thread of the handheld transmitter and
tighten it clockwise.
• If you want to change the microphone head, unscrew it from the
transmitter by turning it anti-clockwise.
• Make sure that you switch off the handheld transmitter before
changing the microphone head.
TG V50w
Dynamic microphone head, cardioid polar pattern, for vocals.
Very wide pick-up area. High gain before feedback.
TG V56w
Condenser microphone head, cardioid polar patter, for solo
singers, conference and speeches. Discreet treble boost. High gain
before feedback.
TG V70w
Dynamic microphone head, hypercardioid polar pattern, for
vocals. Powerful sound. Extremely high gain before feedback.
Tighten the microphone head
clockwise.
Unscrew the microphone
head by turning anti-
clockwise.
To Next Page
Loading...
