LEGENDA
Fig. A
OK
Press the OK key
[
00
]
Parameter increment/reduction
or ON/OFF commutation
Menu scrolling
(+ = preceding - = following)
Press OK key (Enter/confirm)
OK! message (confirms modification made)
PRG
-
+
/ON
/OFF
KO! message (value or function error)
ÒWaitÓ message (enter value or function)
Simultaneously press the + and - keys.
Simultaneous pressure of the + and Ð keys
allows you to exit the active menu and return
to the preceding menu; if this takes place at
the main menu level, programming is exited
and the display switched off.
The modifications made are only confirmed if
the OK key is subsequently pressed.
Preset value
BFT
ALTAIR-MA1.0
0000
0000
00
PARAM
LOGIC
OK
OK
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
Control unit software version
No. total manoeuvres
(in thousands)
No. manoeuvres since latest
maintenance (in thousands)
No. radio control devices
memorised
PARAMETER MENU
Work Time
value expressed in tenths of a second
(default 10.0=10s, min 3.0=3s, max
60.0=60s)
TCA
(automatic closing time)
value expressed in seconds
(default 10=10s, min 3=3s, max
90=90s)
Motor torque
Ð value expressed in
%(default 50%, min 1%, max 99%)
Opening phase-difference Time
value expressed in tenths of a second
(default 1.0=1s, min 1.0=1s, max 5.0=5s)
Closing phase-difference Time
value expressed in tenths of a second
(default 1.0=1s, min 1.0=1s, max 20.0=2s)
Zone
numerical value
(default 1, min 0, max 127)
+
/
-
+
/
-
PRG
To Next Page
Loading...
