T: 07 4779 1740 F: 07 4725 6228
W: www.mcgovernagencies.com.au E: admin@mcgovernagencies.com.au
1/324 Bayswater Rd Garbutt P0 Box 7526 Garbutt Q 4814
DIRECTION CHANGE IF REQUIRED
(while in LOGIC menu.)
Press (-) and (+) till screen says oPEn in othEr dirEct
Press OK
Press 1
Press OK
CODING REMOTES
Press (-) and (+) simultaneously until screen says LOGIC
Press OK
Press (-) and (+) until screen says RADIO
Press OK
*Screen says Add Start
Press ok
Screen says hiddEn bUtton
Press the 2 top buttons on remote control at the same time. After
approximately 2 seconds the LED will come on, release the buttons.
The screen will now say dEsirEd bUtton
Press the button on the remote you want to use for 2 secs (LH) screen will say
OK 01
Repeat from * for next remote. Screen will say OK02 etc. for extra remotes
To Next Page
Loading...
