SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8853
Air Belt Grinder
SPECIFICATIONEN
Abrasive belt size: 330 x 10 mm
Speed: 16000 rpm
Air consumption: 170 l/min
Working pressure: 6.3 bar
Air inlet: 1/4"
Weight: 1.2 kg
Dimension: 310 x 85 x 50 mm
Noise Level: LpA: = 93 dB(A)
LwA: = 104 dg(A)
Vibration Level: ahd = 4.8 m/s²
I
MPORTANT SAFETY INFORMATION
WARNING!
Read and understand and follow all instructions and warnings before operating this tool.
Failure to do so may result in personal injury and/or property damage and will void warranty.
Before first use, lubricate the air tool with 4 to 5 drops of pneumatic equipment oil.
Use proper air pressure and CFM rating listed for this tool.
1
. Be sure air tool is in OFF position when connecting tool to air supply.
2. Avoid unintentional starting of the tool. Do not carry the tool with a finger on the trigger.
3. Always wear approved eye protection when using tools. If raising dust, wear a suitable mask.
4. Use only those accessories that are designed for use with tools.
5. Be sure to disconnect tool from air supply before changing accessories, performing service on
tool, and when not in use.
6. As with any tool, use common sense when operating.
7. Do not wear loose clothing or jewelry that could become caught by moving parts, causing injury.
8. Operate tool a safe distance from yourself and other
s in the work area.
9. Device may only be operated with air maintenance unit incl. oiler
To Next Page
Loading...
Need help?
General
