BH CORE - Page 34

EN
USER MANUAL CORE
34
ES
M A N U A L D E L U S U A R I O
12
Charger
Charger
Battery port
External port
External port
Battery port
1º
1º
2º
2º
Charger
Charger
Battery port
External port
External port
Battery port
1º
1º
2º
2º
STANDBY
CHARGING
CHARGING PROBLEM
100% CHARGED
WARNING
• Never charge or use a damaged battery.
• Be careful not to touch the charger during the charging process. It may be
hot, especially in high ambient temperatures.
• If a fault occurs while the battery is being charged, remove the charger’s
power plug from the socket and wait for the battery to cool down.
• Never touch the power plug, charging plug or contacts with wet hands.
• Make sure that there is no foreign matter on the battery’s contacts before
placing it on the bicycle.
ATTENTION
• Do not connect the charger’s power plug to the battery or bicycle’s char-
ging port if it is wet or damp. Make sure that you only connect the power
plug when the battery or bicycle’s charging port is completely dry.
• Do not apply excessive force on the power plug or pull the cable with the
power plug connected to the battery.
NOTE
• Stopping the battery charging process does not damage the battery.
• The battery achieves its maximum service life in ambient conditions of
15-25 °C.