EN
30
• The appliance was designed only for indoor use and non-extreme
temperature conditions; do not leave it exposed to the elements
(rain, sun, etc.).
• The manufacturer accepts no responsibility and the warranty will
not apply for any commercial use, inappropriate handling or use of
the appliance, any damage resulting from use for other purposes,
malfunctioning, non-professional repair or failure to comply with the
instructions.
• After removing the packaging, and before use, make sure the ap-
pliance and all the attachments are working well. The electrical plug
and sheath should not be cracked or broken. If the conditions de-
scribed above occur, immediately unplug the appliance from mains
outlet and take it to an authorized After-Sales Service Centre for
necessary checking.
• The packing materials (plastic bags, expanded polystyrene, nails,
etc.) should be kept away from children since they are potential
sources of danger.
• Place the appliance on a at, smooth, and stable surface. Do not
put it close to/on hot surfaces, as heaters, cooking hobs, ovens, gas
ranges, open ames, etc.
• Make sure the plate data correspond to the mains. The label is lo-
cated on the bottom of the appliance body.
• In general, it is not advisable to use an adaptor, multiple socket
and/or an extension cord. If they are necessary, use only simple or
multiple adaptors and extension cords that conform to safety regu-
lations, being careful not to exceed the load limits indicated on the
adaptor and the extension cord, and the maximum power indicated
on the multiple adaptor.
• Do not leave the appliance connected when not in use. Remove the
plug from the mains outlet when the appliance is not used.
• If the appliance is not intended to be used for a quite long period,
empty the water tank.
Plug the appliance in only via an earthed plug.
2. Warnings
To Next Page
Loading...
