Bialetti DAMA - Tips for a Good Coffee

EN
41
9. Troubleshooting
Problem Cause Solution
The machine is making
too much noise.
Empty tank (6). Fill the tank (6) with
water.
The machine is not
stable on the support
surface.
Make sure it is positioned
on a at and rigid surface.
The appliance had been
working for a short peri-
od of time without water
in the tank (6).
Make a dispensing cycle
twice or 3 times, or until
the machine noise will
be normal again to allow
the pump to be lled with
water.
The button (1) blinks in
red and green.
The tank (6) is not in-
serted properly or is not
inserted into its seat.
Position the tank (6) into
its seat properly.
The button (1) blinks in
red quickly.
Machine malfunctioning. Press the button (1) for
more than 3 seconds to
switch the machine off.
Wait 20 seconds and
switch the machine on
again. If the problem still
occurs, contact an author-
ised service centre.
10. Tips for a good coffee
• Before making coffee for the rst time, dispense some water only
in order to ensure the perfect dispensing; water does not disperse
heat inside the appliance and uids encounter less resistance.
• For a coffee at the optimal temperature, in case a cup-warmer is
not available, warm the cup up by dispensing only water.
• In order to obtain a thicker and more persistent cream, use cups
with an inner ovoid-shape base.