EasyManua.ls Logo

Bibo Classic - Child lock setting; MAXI filter and UV filter maintenance settings

Bibo Classic
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BIBO BRIGHTER WATER 13
If you want to turn your BIBO on before the programmed time, touch any key and the screen will display this:
Touch the 
the hot tank will take approximately 5 minutes to heat back up to the maximum temperature and the cold tank will take
approximately 15 minutes to chill back down to the minimum temperature.
Child lock setting
To set the extra ‘Child lock’, select the ‘Child lock’ option from the menu. Follow the prompts to turn the ‘Child lock’ on or off:
Once the ‘Child lock’ has been set, it will only be possible to dispense hot water by touching the
key for more than 3
seconds after you have touched the .
MAXI filter and UV filter maintenance settings

‘Filter’ and the screen will tell you how long is left until you need to change it for a new one.

1.
1.
1.
2.
2.
2.
3.
3.

Other manuals for Bibo Classic