Adjusting the height of the seat
In order to adjust the height of the seat you’ll have to unlock the lever that can be seen in the picture
below, adjust the saddle height to the desired position without exceeding the mark carved onto the
saddle’s tube. Lock the lever in place and you’re done.
The saddle’s height must be set so that you can place your feet at the ground comfortably.
Turn the power ON
Use the power button under the battery. Turn the throttle slowly to drive the bike forward.
The remaining battery power is displayed on the panel after turning the power on.
Power cut during braking
To ensure the rider’s safety, the motor will stop working when braking and restart after the brake
lever is released.
Riding
Test each of the functions before riding to get used to the functions of the e-bike like, controlling
the brake, throttle and handlebar.
Turn the throttle slowly, then sit back and enjoy the ride.
Every cyclist should obey the traffic rules.
How to Ride the Electric Bike
How to Remove
the Battery
1) To remove the battery you must
unlock the key lock which is located on
the side of the battery.
2) Remove the battery from the frame.
How to Replace
the Battery
1)In order to ensure long term service of your e-bike, please use genuine parts.
2)Make sure the waterproof connection is properly connected.
3)Do not use the battery if it has outlived its life expectancy.
1) Unlock the battery and remove it from
the frame
2)Insert the new battery in and lock it in
place.
To Next Page
Loading...