EMILIO
32
ENGLISH
CE branded plugs/extension cables in compliance with europe-
an norms and/or properly set and with a grounding system.
12. Any type of maintenance and/or cleaning must be performed
with the machine o, cooled and unplugged.
13. Use only original spare parts and accessories.
14. Installaon, maintenance and repairing must be performed by
qualied personnel authorized by the manufacturer.
15. Before connecng the appliance verify that the line voltage
matches with the data wrien on the label on the back; if you
are not sure of your line voltage, apply to qualied personnel.
16. The electrical system to which the appliance will be connected
must be wired and supplied with a residual current device (life-
line wiring) and an earthed conductor lead, mandated by law.
Make sure of these security basic requirements, and if in doubt,
contact a qualied technician. The manufacturer is not respon-
sible for eventual damages to persons and/or things caused by
absence or malfuncon of the residual current device or the
earthed conductor lead.
17. Safe funconing is guaranteed only when the appliance is con-
nected to the public power grid, with a 3 poles plug (no xed
connecon). Once connected, the plug must be accessible so it
can be unplugged in case of need.
18. To avoid damages, the connecon data on the machine plate
(protecon, frequency, voltage) must match with the ones of
the power grid to which the machine will be connected. In case
of doubt apply to a qualied technician.
19. When showing even small signs of damage, replace the power
cable with one of the same type (available to the authorized
technical assistance). The replacement must be done only by
authorized personnel or the technical assistance authorized by
the manufacturer.
20. The security stopper/security valve must be replaced every 3
To Next Page
Loading...