EMILIO
39
ENGLISH
6. REGULAR MAINTENANCE
At the end of each use, empty and clean the inox body.
Wait for the boiler to be cool and the pressure gauge to show “0”, place a container under the
boiler and open with cauon the drain valve placed under the boiler leng the water out.
Open the draining tap use the handle/lever places on the front side of machine.
In order to protect gaskets, o-rings, it is important to spray grease on the handle couplings, on
the steam/water plug on the gun and on the steam/water socket on the machine.
To carry out an extraordinary cleaning, it is possible to pour into the boiler a glass of vinegar
and water. Then shake the steam generator and empty the boiler and rinse with only water. Do
not use any anscale product.
1
ATTENTION: BEFORE DRAINING THE WATER FROM THE BOILER, UNPLUG THE MACHINE
AND UNSCREW BY HALF A TURN THE SACURITY TAP TO RELEASE THE REMAINING PRESSU-
RE AND HEATH FROM THE BOILER.
THIS OPERATION MUST BE DONE DEPENDING ON THE USE OF THE MACHINE, AT LEAST
ONCE A MONTH. IF NOT, THE GUARANTEE WILL DECAY.
To Next Page
Loading...