BIEPI Sara - Components

En
- 6 - Rev. 1
 The machine must be used by children - or persons with reduced
physical, sensorial and psychic faculties or with lack of
experience or knowledge - only if supervised.
 Keep children away from the machine and never let them playing
with it.
 Turn off the main switch before connect or disconnect the plug
from the socket.
 Do not use the machine with one or more damaged components.
Do not attempt repairs, call an authorized Service instead.
 WARNING: Some components may reach high temperatures.
 WARNING: The machine may squirt hot liquid during coffee
dispensing.
 Pay attention when handling the steam nozzles. Never put your
hands under the nozzle and never direct the jets toward persons
or animals.
 The maximum sound noise level is lower than 70db
For further information please contact with your supplier, with the
nearest Service Center or directly to BIEPI Srl.
Intended Use
Sara is a coffee machine. It is designed and manufactured to brew
and dispense espresso coffee, to emit hot steam and to dispense hot
water.
The machine is intended for professional use. It is intended for
persons informed and trained about its operation. The machine must
be used in a conscious and careful manner.
The Instruction Manual must follow the machine when the property
of the machine changes.
The machine is not intended for outdoor use.
It is forbidden to change parts in the machine or to repair the
machine without permission. BIEPI Srl is not liable for any damage
due to poor repair assistance.
En
- 7 - Rev. 1
Installation
Do not left unattended plastic bags, polystyrene, nails and other
parts of the packaging. They may be source of risks.
Place the machine on a horizontal, solid and stable surface, away
from heat sources. Leave a space of 20 cm around the machine for
maintenance and cleaning.
The machine must be easily accessible to extraordinary maintenance
operations.
Preliminary Operations
There are some operations that have to be carried out before start:
- Rinse the water tank and fill it up with
drinkable water, then place the water
tank in its place.
- Rinse the filter.
- Connect the filter to the inlet hose and
immerse the filter in the water tank.
- Let the filter release the air and try to
keep it immersed.
Do not overfill the tank (check the level indicator).
When all the components are properly placed, connect the plug in
the socket.
The power outlet must be provided with the earth connection pin.