BIG TREE TECH KNOMI User Manual

[gcode_macro BED_MESH_CALIBRATE]
rename_existing: BED_MESH_CALIBRATE_BASE
variable_probing:False
gcode:
SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=probing VALUE=True
BED_MESH_CALIBRATE_BASE
SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=probing VALUE=False
[gcode_macro G28]
rename_existing: G0028
variable_homing:False
gcode:
SET_GCODE_VARIABLE MACRO=G28 VARIABLE=homing VALUE=True
G0028
SET_GCODE_VARIABLE MACRO=G28 VARIABLE=homing VALUE=False
10
WWW.BIGTREE-TECH.COM
ADDING RELEVANT MACROS
HOMING AND LEVELING
KNOMI requires the addition of relevant macros for homing and leveling within the printer.cfg file. Access the print control interface by
entering the Klipper IP address into your browser, locate the config Files directory containing printer.cfg, and insert the following macro
definitions. Once completed, save and exit.

BIG TREE TECH KNOMI Specifications

General

Brand	BIG TREE TECH
Model	KNOMI
Category	3D Printers
Language	English