Need help?Do you have a question about the BIG TREE TECH KNOMI 2 and is the answer not in the manual?
General| Category | Monitor |
|---|---|
| Product Name | KNOMI 2 |
| Touchscreen | Yes |
| Interface | USB Type-C |
| Power Supply | DC 5V |
Describes the initial startup interface and network readiness for KNOMI 2 configuration.
Details steps to connect a device to the KNOMI Wi-Fi network and configure printer IP.
Addresses router encryption compatibility and troubleshooting Wi-Fi connection loss.
Explains the correct routing of wires through printed parts before assembly.
Guides on connecting the power cable and antenna to their respective ports on KNOMI 2.
Provides instructions and tips for installing the mounting plate for KNOMI 2.
Details installing the turbine fan and attaching the antenna to it.
Instructions for installing the EBB SB0000 CAN or similar tool board.
Shows how to route the power cable and connect it to the power source.
Provides G-code macros for managing KNOMI status variables in printer.cfg.
Offers G-code macros for the Quad Gantry Level feature in printer.cfg.
Presents G-code macros for the Z Tilt Adjust function in printer.cfg.
Explains how to access the KNOMI 2 network configuration page for firmware updates.
Guides on selecting the firmware file (xxx.bin) and the automatic update process.
Shows how KNOMI 2 indicates a successful firmware update and how to return to the main interface.
Introduces the main UI elements and gesture controls for navigating KNOMI 2.
Details how to use the interface for extruding and retracting filament.
Explains how to initiate and manage ABL, QGL, and Homing processes via the UI.
Guides on adjusting nozzle and heated bed temperatures through the interface.
Covers manual temperature adjustments and filament presets available on KNOMI 2.
Describes the various settings available, including UI theme, backlight, and Klipper control.
Details how to change the UI theme color using presets or custom RGB selections.
Explains how to adjust screen brightness and access the online user manual via QR code.
Provides a guide to understanding the various status icons displayed on the KNOMI UI.
Addresses common FAQ about Moonraker connection failures and printer unoperational states.
To Next Page