BIG TREE TECH KNOMI 2 - Quad Gantry Level Macros (printer.cfg)

14
WWW.BIGTREE-TECH.COM
If the printer has a QGL feature :
[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing: BTT_QUAD_GANTRY_LEVEL
gcode:
SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=qgling VALUE=True
BTT_QUAD_GANTRY_LEVEL
SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=qgling VALUE=False
001
002
003
004
005
006
ADDING RELEVANT MACROS