Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
17 / 17
Cautions
1. The TF card cannot be hot-swapped. Please check that the TF card is properly
inserted before turning on the power;
2. Customers are not recommended to disassemble the device, since they do not
know the internal structure and it may easily result in a breakdown of the internal
circuits; there will be no compensation for problems caused by disassembling;
3. Replace the core board according to the replacement steps (To Replace CB1
with CM4);
4. Please follow the silkscreen carefully when wiring the SPI interface to the
expansion module to prevent short circuits.
If you need other resources for this product, please visit https://github.com/bigtreetech/
and find them yourself. If you cannot find the resources you need, you can contact our
after-sales support.
If you encounter other problems during use, feel free to contact us, and we are answering
them carefully; any good opinions or suggestions on our products are welcome, too and
we will consider them carefully. Thank you for choosing BIGTREETECH. Your support
means a lot to us!
To Previous Page
Loading...