20-24
© 2005 Ver. 1 Fors MW Ltd www.forsmw.com
3.3. OPERATION WHEN DRIVING
It is the responsibility of the user to ensure that a sufficiently powerful and heavy
towing vehicle is coupled to the trailer in all situations. The use of a towing vehicle
that is too small and insufficiently powerful can entails risks for the user and the
surrounding environment, as well as leading to damage to the vehicle and trailer.
Load* (excl. the container’s dead weight)
7 m³
Peas, Wheat, water content 15%
Barley, water content 15%
Wood chips (50% moisture content)
*The higher the moisture content of the load, the heaver the load, a fact that the user has
to take into consideration. This table is only an approximate estimate of the weights that
can occur, and it is the responsibility of the user to ensure that the vehicle’s limits and the
applicable legislation are not being exceeded. The specified values are not exact values,
just examples.
Figure 32. Example of weight with different types of load
For information purposes and for examples of how many different loads can weigh,
please refer to the above table. This table should only be viewed as guidance and
information. The manufacturer cannot be held responsible for dimensions or volumes
specified in the table, and the table may only be viewed as a recommendation.
3.3.1. Load on towing eyelet and coupling
Always adapt your driving to the load, road conditions and your level of experience.
Do not exceed the maximum speed specified for the trailer. Ensure that you have the
correct pressure on the tow hook when you are driving. Ensure that you do not exceed
the intended upwards and downwards pressures on the trailer’s towing eyelet and the
coupling to the hook device.