BIGREP ONE GENERATION 3 - V-I Software

V. Maintenance BigRep
V-I Soware
* 2016-04-14
How to Update new soware
1. Stop a print, or wait for print to stop (naturally)
2. Select ‚Turn o Printer‘ and select ‚Exit UI‘ This will return you to Linux OS
screen
3. Click the bottom le corner (run) and select ‚accessories‘, then ‚LX Terminal‘.
This will give you ‚Terminal (text command line) control of the machine
4. To VIEW the current version, type sudo apt-get update (checks availabili-
ty, password required) and apt-cache policy bigrep-one
You should see info like:
Installed: 0.5.X
Candidate: 0.5.X
5. To update soware type in update_one (password required)
6. Turn on and o machine twice!
Change config
1. Open X-Term in Linux
2. Go to sudo leafpad /mnt/boogie/config
3. Enter password
4. Change setting
5. Save config
6. Turn the machine o and on aer saving new values
V-I 1/1