Need help?Do you have a question about the BIGREP STUDIO and is the answer not in the manual?
Defines various warning symbols used in the manual to indicate hazards like danger, warning, caution, and specific risks.
Details critical safety instructions, including electrical, chemical, and mechanical hazards, and general safety rules.
Explains how to use the emergency stop buttons and the procedure for restarting the machine after an emergency stop.
Highlights safety warnings during operation, including risks of burns, hot surfaces, and improper filament use.
Covers essential preparation steps like setting extruder Z offsets, XY offsets, and calibrating flowrate multipliers.
Guides users through the process of starting, operating, and turning off the BigRep STUDIO printer.
Details the steps for changing filament, including before, during, and after printing, and handling out-of-filament notifications.
Explains the procedure for replacing the entire extruder or individual hotends, including safety notes.
Provides a step-by-step guide for removing and mounting hotends, including required tools and calibration.
General| Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Layer Resolution | 50 - 500 microns |
| Print Speed | Up to 100 mm/s |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Ethernet, Wi-Fi |
| Heated Bed | Yes |
| Nozzle Diameter | 0.6 mm (standard), options available |
| Materials Supported | PLA, ABS, PETG, TPU, Nylon |
| Software | BigRep BLADE |
| Power Requirements | 230V, 16A |
To Next Page
