BIGREP STUDIO - Specifications

BigRep STUDIO 1 Introduction
51
Limitation of Liability
The manufacturer and its representatives shall not be liable for damages resulting
from
› Force majeure events, e.g. natural disasters such as earthquakes, storms, floods
› Fire, accidents
› Interventions by third parties
› Improper use
› Use of unsuitable filament diameter and / or material
› Non-compliance with this manual
› Use of unauthorized spare parts
› Unauthorized modifications of the printer
› Incorrectly configured, faulty or unsuitable slicing soware
1.2. Specifications
Manufacturer BigRep GmbH Model BigRep STUDIO
Berlin / Germany Version 08/2017
Dimensions [X:Y:Z ] 1693 x 1056 x 1506 mm Weight Printer 350 kg
Min. Layer
Resolution
100 m Extruder Dual extruder
Max. Layer
Resolution
400 m Nozzle 0.6 mm diameter
Brass
Printing Technology FFF 3D Print Surface Polyimid
Build Volume Single
Extrusion [X:Y:Z]
1060 x 515 x 505 mm Heating
Strategy
Heated print
surface
Build Volume Dual
Extrusion [X:Y:Z]
1060 x 483 x 500 mm Extruder
Temperature
Max. 240° C
XY Position
Repeatability
100 m Print Bed
Temperature
Ca. 60-70°C
Z Position
Repeatability
100 m AC Input 208-240V 1 or 2
AC 50/60Hz, 16A
Filament Diameter 2.75 – 3 mm NC-Language G-Code
Printing Materials PLA, PETG, PRO HT,
PRO HS
Ambient Operat-
ing Temperature
+15°C … +35°C
Firmware Smoothieware
Wear Parts
Hotend (part of the extruder)
Print bed tape (adhesive tape covering the print bed)