Need help?Do you have a question about the BIGREP ONE GENERATION 3 and is the answer not in the manual?
Information on downloading updated subchapters from the reseller portal.
Covers mechanical components of the BigRep ONE 3D printer.
Details the electrical systems and components of the printer.
Explains the software, firmware, and operating interfaces.
Provides instructions for printer installation and initial setup.
Covers routine maintenance procedures and component replacements.
Contains supplementary information and reference materials.
Lists specific updates and changes made to the technical manual over time.
General overview of the printer's mechanical components and structure.
Details about the BigRep ONE's heated printing bed and its features.
Explanation of end stops and their function in defining printer axes.
Description of the printer's X, Y, and Z axis movements and their mechanics.
Detailed overview of the extruder unit, its components, and function.
Details on the spool cabinet for holding filament spools.
Information on adjusting the machine base height and alignment.
General overview of the printer's electrical system and requirements.
Details about the printer's control unit, access, and security.
Explanation of emergency stop buttons and safety edges.
Wiring diagram and important notes for extruder connections.
Overview of the onboard PC, its software, and connectivity.
General overview of the printer's software, OS, and base firmware.
Explanation of the Smoothie firmware and its role in printer operation.
Details about the configuration file and its operational settings.
Description of the Graphic User Interface for printer operation.
Information about Pronterface, an alternative control software.
Overview and list of important G-Codes and M-Codes for printer operation.
Overview of the setup process, printer dimensions, and weight.
Requirements for the printer's operating environment and space.
Detailed instructions for unpacking the printer from its shipping box.
Guidance on performing a visual inspection of the printer.
Instructions for documenting the printer with photographs.
Guidelines for setting up the printer's electrical connections.
Instructions for assembling the spool cabinet, table, fuse, and extruders.
Procedures for performing basic function tests after setup.
Steps for setting up and calibrating the laser sensor for autoleveling.
Instructions for performing the automatic bed leveling procedure.
Extruder extrusion test and calibration for flow rate and filament out sensor.
Procedures for running test prints to check flow consistency and accuracy.
Overview of regular maintenance tasks and expendable items.
Step-by-step guide for replacing the print bed tape.
Instructions for replacing the extruder nozzle.
Guide for replacing the extruder unit.
How to check and adjust stepper values for axis and feed wheels.
Guidelines for lubricating the printer's axes and belts.
Information on belt tension adjustment and replacement.
Detailed procedure for leveling the print bed and calibrating extruders.
Instructions for updating software and changing configuration files.
Information sources for technical data and materials for clients.
Details on shipping, requirements, and unpacking the printer.
Overview of configuration changes and stepper value adjustments for specific versions.
Guide to getting started with Simplify3D slicing software for BigRep.
General| Brand | BIGREP |
|---|---|
| Model | ONE GENERATION 3 |
| Category | 3D Printers |
| Language | English |
To Next Page
