IV. Setup BigRep
IV Setup
IV-A Overview
* 2016-04-07
Setup has to be done by BigRep sta or certified
BigRep Reseller.
Printer comes preassembled (excl. spool cabinet)
in a wooden, IPPC certificated, box:
› Weight ca. 750 kg / 1.650 lbs (500 kg / 1.100
lbs printer + box)
› Dimensions: [Length x Width x Height]
225 x 200 x 200 cm
Printer runs through longterm QS testing before it leaves BigRep facility.
Power supply has to be changed if needed.
Printer comes with preassembled Schucko Plug, which can easily be changed.
Setup regularly takes two business days, incl. testprint and instruction .
Scope of Delivery (depending on model)
› BigRep ONE (incl. 2 extruders)
› 2 hot ends (preassembled, nozzle diameter 1mm)
› 1 separate hot end with nozzle, diameter 1mm
› Hex key for exchanging hot ends
› Scraper to remove objects
› 2 electrical fuses for the UPS (in the control cabinet)
› 25mm spacer (for leveling)
Additionally in the Advanced Kit
› PVA pack
› Nozzle cleaning station
› Extended run-time UPS
› Web access + web-cam
IV-A 1/1
To Next Page
Loading...
