yes no
yes no
Bigrep – Shipping/requirements/Unpacking page 1/2
(loading-forks at least 71inch/180cm long)
2. Measurements Shipping Box
a. Printer will be shipped preassembled (except spoolholder) in one IPCC certified wooden box:
1. Shipping
a. Shipping: Do you like to handle the shipping?
b. Unloading: Do you have a forklift/lifttruck?
3. Electricity
b. Maximum power consumption is 2700 watt, average 1500 watt.
c. You need at least 200 volt and 16 ampere.
4. Delivery Address
a. Could you please confirm the delivery address:
Delivery address: Name and phone number of
contact person:
Dimensions: Lenght Width Height
225 cm 200 cm 200 cm
If not: please let us know as soon as possible, we will provide you a quote
from our freight forwarder and handle the shipping - also door to door if
preferred.
PLEASE MAKE SURE THAT THERE ARE NO DOORS BETWEEN UNLOADING AREA
AND FINAL LOCATION OF THE PRINTER SMALLER THAN 200 CM IN WIDTH AND
210 CM IN HEIGHT!
If you do not have a standardized power supply, it his highly recommended to
provide the power supply by an authorized electrician !
Weight: ca 800 kg (500 kg printer + box)
a. The printer comes with a 200V - 240V configuration and an european Schuko plug which
can be replaced by a local plug if necessary.
To Next Page
Loading...
