Relay V1.2 User Manual ShenZhen BigTree Technology CO.,LTD .
8 / 8
Ⅶ. Notes
1. The wiring process must be carried out under the premise of power failure；
2. When wiring, please pay attention to the sign on the module and the wiring
diagram of the instruction. Only when the wire is exactly right can it be energized；
3. The bottom of Relay V1.0 module shall be far away from water, metal and
other conductors to prevent short circuit and electric shock which may cause
accidents；
4. Do not touch the wire and Relay V1.0 module to prevent electric shock；
5. Be sure to do insulation treatment when using to prevent electric shock；
6. When wiring, you must ensure the adequacy of wire contact, avoid bad
contact；
7. Ac input voltage support：125V/AC-250V/AC 50-60Hz ；
8. Our company will not be responsible for any accident caused by failure to
follow the instructions or drawings.
To Previous Page
Loading...
