Need help?Do you have a question about the BIGTREETECH U2C and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| USB Connector | Type-C |
| CAN Bus Chip | MCP2515 |
| Input Voltage | 5V |
| CAN Baud Rate | Up to 1Mbps |
| Interface | CAN Bus |
| Function | USB to CAN Bus communication |
Lists key features of the USB to CAN bus module, including connectivity, performance, and build quality.
Displays the physical measurements of the BIGTREETECH U2C module.
Details the function and purpose of the CAN_IN, CAN_OUT*, and CAN_OUT ports on the module.
Explains the USB-A ports, including power jumpers and terminal resistance configuration.
Provides the URL for the open-source CandleLight firmware used by the module.
Step-by-step instructions for updating the module's firmware via DFU mode.
Guides on setting up the module for use with Klipper, including network interfaces and bus queries.
To Next Page
