BIGTREETECH
4 / 11
1. Product Introduction
BIGTREETECH U2C is a USB to CAN bus module, which can convert the USB
port of Raspberry Pi to the CAN bus, and connect 3D printing motherboard,
BIGTREETECH EBB35/36/42 CAN and other products through CAN bus. There
are many different forms of CAN interfaces on the board, which are helpful to
connect to different boards.
CAN bus has many advantages in the field of industrial control, so our company
has launched this USB to CAN module. The CAN bus has a long transmission
distance, and a large number of nodes can be mounted on it, so the motherboard,
EBB, and other expansion boards can be mounted on the same CAN bus at the
same time.
1.1 Product Features
1. Support CAN bus connection, long data transmission, strong anti-noise ability,
strong real-time performance and high reliability.
2. The surface of the PCB adopts the ENIG process.
3. The TYPE-C port is equipped with ESD protection to prevent static electricity
from damaging the hardware.
4. Support firmware update for the motherboard through SWD or hardware
DFU.
5. More than on CAN interface.
1.2 Product Dimensions
To Next Page
Loading...
Need help?
General
