Biketec AG Flyer - Components Which Do Not Have to be Replaced with Approved Replacements

80
Exchanging components on the “Speed FLYER”
Model Line Type Size Max. load*
Marathon Supreme Evolution Falt/ Draht 37-622 110 kg (6 bar)
Marathon Supreme Evolution Falt/ Draht 50-559 140 kg (5 bar)
Marathon Dureme Evolution Falt/Draht 37-622 110 kg (6 bar)
Marathon Dureme Evolution Falt/Draht 50-559 140 kg (5 bar)
Marathon Extreme Evolution Falt 37-622 115 kg (6 bar)
Marathon Extreme Evolution Falt 50-559 140 kg (5 bar)
Marathon Plus Performance Draht 37-622 110 kg (6 bar)
Marathon Plus Performance Draht 47-559 125 kg (5 bar)
Marathon Performance Draht 37-622 110 kg (6 bar)
Marathon Performance Draht 50-559 140 kg (5 bar)
Big Apple Performance Falt/Draht 50-622 150 kg (5 bar)
Big Apple Performance Falt/Draht 50-559 125 kg (5 bar)
Big Apple Performance Draht 50-305 70 kg (5 bar)
Big Apple Performance Draht 50-203 70 kg (4 bar)
Kojak Performance Falt/ Draht 35-622 110 kg (6,5 bar)
Smart Sam Performance Draht 42-622 120 kg (6 bar)
Smart Sam Performance Draht 54-559 140 kg (4 bar)
Carzy Bob Performance Draht 60-507 130 kg (4,5 bar)
Energizer Active Draht 37-622 85 kg (6 bar)
Energizer Active Draht 40-622 95 kg (6 bar)
Energizer Active Draht 47-559 90 kg (5 bar)
32.3 Components which do not
have to be replaced with approved
replacements
• Crankset
• Pedals: If pedal reflectors are integrated in
the design.
• Mudguard: The front edge of the mudguard
has to be blunt.
• Luggage rack
• Seat / seat post
• Handlebar grips
• Bell: Can be replaced with a bell with equal
quality and audibility.
• Rear-view mirror: Can be replaced by a dif-
ferent type approved rear-view mirror.
• Chain
• Headset
• Inner tube
• Hubs
• Gear components: Only if the largest gear
ratio is not changed.
* Max. load with stated tyre pressure