What to do if I forgot my Billion BiPAC 7700N Network Router password?
If you've forgotten your login username or password for your Billion Network Router, first try the default username "admin" and password "admin". If that doesn't work, restore your router to its factory settings by pressing the reset button on the device's rear side.
Why does my Billion BiPAC 7700N keep disconnecting?
Frequent disconnections of your Billion Network Router may be caused by missing or incorrectly installed line filters. Ensure that all devices connected to the same phone line (telephones, fax machines, analogue modems) have a line filter between them and the wall socket, unless you're using a Central Splitter or Central Filter installed by a qualified electrician. Also, make sure all line filters are correctly installed.
What to do if I cannot PING any PC on LAN with my Billion BiPAC 7700N Network Router?
If you cannot PING any PC on your LAN using the Billion Network Router, check the Ethernet LEDs on the front panel. The LED should be lit for the port where a PC is connected. If it's not lit, verify the cable between your router and the PC is properly connected. Also, uninstall your firewall program before troubleshooting. Ensure that the IP address and subnet mask are consistent for both the router and the workstations.
How to fix Billion BiPAC 7700N when no LEDs are on?
If none of the LEDs are on when you turn on your Billion Network Router, check the connection between the router and the adapter. If the problem persists, it's likely a hardware malfunction. Contact your service provider or Billion for technical support.
General| Wireless Speed | Up to 300Mbps |
|---|---|
| Frequency Band | 2.4GHz |
| Security | WEP, WPA, WPA2, WPS |
| Power Supply | 12V DC, 1A |
| LAN Interface | 4 x 10/100Mbps Ethernet |
| Wireless Standards | 802.11n, 802.11g, 802.11b |
| VPN Support | PPTP, L2TP |
| Features | Firewall |
To Next Page
