Bimar B400 User Manual

30
Default parameters
00:30
100
Adjustment range
00:01 ~ 02:00
100 ~ 110
Baking
The programme uses the upper and lower heating elements. The default
time and temperature are 30 min. and 180°C. When the programme is
selected, the symbols and and flash: press the knob to access
the programme and adjust the parameters.
The display now flashes the time (00:30): turn the knob to increase or decrease the time,
and press it to confirm the selection. The display now flashes the temperature (180): turn
the knob to increase or decrease the temperature, and press it to confirm the selection. The
display will stop flashing, and the pre-heating function will start: the symbol will light
up. Once the temperature has been reached, the symbol and
goes out and a sound signal (about 10 "Beeps”) is made to tell you to insert the food in the
oven, and also the programmed cooking will start that will end at the end of the set time.
Time (h:min)
Temperature (°C)
Default
parameters
00:30
180
Adjustment
range
00:01 ~ 02:00
100 ~ 230
Baking and
steaming
The main function is baking, during which steam is injected at intervals.
The programme uses the upper and lower heating elements, and the
steam generator. The default time and temperature are 30 min. and
180°C.
When the programme is selected, the symbols and flash: press the knob to access
the programme and adjust the parameters. The display now flashes the time (00:30): turn
the knob to increase or decrease the time, and press it to confirm the selection. The display
now flashes the temperature (180): turn the knob to increase or decrease the temperature,
and press it to confirm the selection. The display stops flashing, the cooking process starts
and ends when the set time expires.
Time (h:min)
Temperature (°C)
Default
parameters
00:30
180
Adjustment
range
00:01
~
02:00 120
~
230
Air frying
The function cooks like when frying but without immersion in oil. The
programme uses the rear heating element combined with the convection
system. The default time and temperature are 30 min. and 180°C. When
the programme is selected, the symbols and and flash: press
the knob to access the programme and adjust the parameters.
The display now flashes the time (00:30): turn the knob to increase or decrease the time,
and press it to confirm the selection. The display now flashes the temperature (180): turn
the knob to increase or decrease the temperature, and press it to confirm the selection. The
display will stop flashing, and the pre-heating function will start: the symbol will light
up. Once the temperature has been reached, the symbol goes out and a sound (about

Bimar B400 Specifications

General

Brand	Bimar
Model	B400
Category	Oven
Language	English