OPERATING INSTRUCTIONS
1. Make sure that the fan is on a firm and level surface.
2. Plug the cord of fan into a standard AC 230V outlet.
3. The speed of the fan can be selected by speed knobs on the control panel.
• 0 button – press to turn “off” the fan.
• 1 button – press for low gentle, quiet operation.
• 2 button – press for medium normal use.
• 3 button – press for high quick cooling and maximum desired air movement.
4. Fan head can be oscillated from left to right.
To operate – press down the oscillation control knob (9).
To stop the oscillation – pull up the oscillation control knob (9)
5. Fan head can be tilted up and down.
To tilt the head, simply move the motor housing up or down gently until the fan is
positioned as required. A series of clicks will be heard - this is normal.
To Next Page
Loading...
