EasyManua.ls Logo

Binatone A-1810 - AIR FRESHNESS

Binatone A-1810
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
AIR FRESHNESS
The Air Freshness module can be used as an Air Freshener or as a Mosquito Repellent by
soaking the provided sponge pads with appropriate liquids.
We recommend that the sponge pads are sprayed/soaked with
appropriate liquid, depending on operation mode. The sponge pad
should be thoroughly wet but not dripping wet before inserting to your
fans Air Freshness module.
To fit the sponge pad - firstly, locate and remove the Air Freshness module grill cap (H) on the
front grill (G).
To unlock, rotate counter clockwise and remove the grill cap (H).
Fit the soaked sponge pad to the inside of the grill cap (H) - push it in
carefully, the tabs will secure it in place.
Refit the grill cap/sponge pad assembly to the front grill (G) and rotate
clockwise to lock in place. Operate the fan as usual, following the user
guidelines.
Note: the soaked sponge pad will dry out as the liquid is dispersed -
this is normal. We recommend checking and recharge the sponge
pad every 3-4 hours.
(*) CAUTION : Select a safe mosquito repellent liquid for use with this
product. Many insecticide type products are unsafe for humans and
animals through inhalation or contact with skin & eyes.
Read the safety instructions of the repellent liquid carefully. If in doubt
do not use it.

Related product manuals