Binks AIRLESS 1 - Parts List

ITEM PART
NO. NO. DESCRIPTION QTY.
1 54-3085 TIP GUARD ASSEMBLY ................ 1
2 54-2229• GASKET ........................................ 1
3 54-3478 DIFFUSER NUT .............................. 1
4 54-2096• WASHER........................................ 1
5 54-3459• WASHER........................................ 1
6 54-3479• SEAT .............................................. 1
7 54-3481 SEAT RETAINER ............................ 1
8 54-3460 TRIGGER NUT................................ 1
9 54-3451 GUN BODY ASSEMBLY ................ 1
10 54-2949
▲ PACKING GLAND .......................... 1
11 54-3488
•
CARTRIDGE ASSEMBLY ................ 1
12 20-5865 SET SCREW
1/4-20 x 3/8" Long .......... 1
13 54-3461 STUD
6-32 x 7/8" Long ...................... 1
14 SAME AS ITEM 8 .......................... 1
15 54-3465
•
WASHER........................................ 2
16 54-2961
•
SPRING .......................................... 1
17 54-3466 GUIDE............................................ 1
18 54-3467 SAFETY KNOB .............................. 1
19 20-4965 SCREW
10-32 x 5/8" Oval Head............ 1
20 54-3454 MATERIAL BODY ASSEMBLY ...... 1
21 54-3458
■ TRIGGER 2 Finger ............................ 1
22 20-5863 SCREW
5/16-24 x 3/8" Flat Head .......... 1
•
Also included in 6-236 Repair Kit. Please order separately.
■ Furnished with 2-finger trigger. Four-finger trigger available, please
order separately. Specify 54-3484.
▲ Part of item 11.
PARTS LIST
When ordering, please specify Part No.
2
11
14
15
13
16
17
18
19
20
21
22
10
9
8
7
6
5
4
3
2
1
12
Binks AIRLESS 1 SPRAY GUN
NOTE
Warning information stamped on nut.
Nozzle tip not
furnished.
Please order
separately.
GLAND
NUT
The optional Twist-Tip Nozzle Cleaner (Ref. Bulletin A54-45)
allows purging of a clogged nozzle without removing the
nozzle from the spray gun. The tungsten carbide nozzle is
permanently assembled into the rotatable cylinder tip insert
(stainless steel) and handle assembly. No alignment or
adjustments are required. No gun nozzle seal gasket is used
as the Twist-Tip II incorporates its own cylinder seal.
Safety Trigger Lock
Turn 90º to disengage
trigger.
NOTE
Sapphire inserts cannot be used with
Airless 1 gun.