77-3046-R4 (5/2018) 1 / 16 www.carlisleft.com
1. Air Nozzle Assembly
2. Gun Body
3. Side Port Control
4. Fluid Control Knob
5. Air Connection 1/4" NPS (m)
6. Fluid Connection 3/8" NPS (m)
7. Air Adjusting Valve
Your new Binks spray gun is
exceptionally rugged in
construction, and is built to
stand up under hard, continuous
use. However, like any other
fine precision instrument, its
most efficient operation
depends on a knowl edge of its
construction, operation, and
maintenance. Properly handled
and cared for, it will produce
beautiful, uniform finishing
results long after other spray
guns have worn out.
1
2
3
4
75
6
READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT.
IMPORTANT!
DO NOT DESTROY
It is the customer's responsibility to have all
operators and service personnel read and
understand this manual.
Contact your local Binks representative for
additional copies of this manual.
SPECIFICATIONS
Maximum Air Pressure 100 psi / 6.9 bar
Maximum Fluid Pressure 100 psi / 6.9 bar
Gun Body Anodized Aluminum
Fluid Path Stainless Steel
Fluid Inlet Size 3/8" NPS
Air Inlet Size 1/4" NPS
Gun Weight 1 lb 6 oz / 635 gm
EN
SERVICE MANUAL
MODEL 2100™ SPRAY GUN
2101-XXXX-X
To Next Page
Need help?
General
